2.9.2. Important precautions regarding the peristaltic pump
When the following message is displayed, the peristaltic pump rotates.
Manual injection
XX:XX
INJECTION
I
In this case, do not remove the front panel of the electronics unit under any circumstances.
I
Do not put your finger in the rotating parts.
If case of doubt about the correct functioning of the peristaltic pump:
1) Switch off the electronics unit.
2) Remove the electronics unit cover that covers the peristaltic pump.
3) Remove the internal tubing from the peristaltic pump, without removing the semi-rigid tubing connected to it.
4) Remove the front panel of the electronics unit
5) Check the condition of the peristaltic pump and internal pipes.
6) Switch on the electronics unit.
7) Carry out a manual vacuum injection.
8) Check that the peristaltic pump is running correctly.
2.10. Data history
Menu
Sub-menu
pH calibration
Time D-1
Average time
Filtration
W-1
Average time
M-1
Time D-1
Average time
W-1
Average time
pH injection
M-1
Total
Temp. D-1
Temperature
Temp. W-1
Temp. M-1
2.11. Additional information
Menu
Software Version
MASTER: XX.XX.XX
Software Version
CORE: XX.XX.XX
Config ID:
XXXXXXXX
S/N:
XXXX-XXXXXX-XXX
MAC BLE:
XXXXXXXXXXXX
MCU temperature:
XX°C
Real-time countdown. Press OK to pause the injection or
Automatic pH control. Press Menu, to pause the injection.
-
Date of the last pH probe calibration
Duration of filtration pump operation the previous day
Average daily operating time of the filtration pump the previous week
Average daily operating time of the filtration pump the preceding month
Duration of peristaltic pump operation the previous day
Average daily operating time of the peristaltic pump the previous week
Average daily operating time of the peristaltic pump the preceding month
Cumulative duration of peristaltic pump operation since the first start-up of the
electronics unit
Average water temperature the previous day
Average water temperature for the previous week
Average water temperature for the previous month
Meaning
Control board program
Device software version
Configuration code
Serial number
MAC address for Bluetooth connection
Temperature inside the electronics unit
to stop it.
Content
12