Publicidad
Idiomas disponibles
Idiomas disponibles
product, contact your dealer or a domestic waste
collection service.
At the end of their working life, dispose of
batteries paying due attention to the
environment. Batteries contain material
classified as hazardous for you and the
environment. They must be removed and
disposed of separately at a facility that accepts
lithium-ion batteries.
Separate waste collection of the products
and packaging used allows the materials
to be recycled and reused. Reuse of
recycled materials help to prevent
environmental pollution and reduces the
demand for raw materials.
3. ABOUT THE MACHINE
3.1 MACHINE DESCRIPTION
AND INTENDED USE
This machine is a garden tool and more precisely
a battery-powered portable hedge trimmer.
The machine is essentially composed of a motor
which drives a cutting means.
The operator can operate the machine and use
the main controls, always keeping a safe distance
from the cutting means.
3.1.1 Intended use
This machine was designed and manufactured
for:
• cutting and trimming bushes and hedges
comprising shrubs with small branches
• being used by one operator.
3.1.2 Improper use
Any other use that does not comply with the
above, can be dangerous and cause damage to
people and/or property. Examples of improper use
may include, but are not limited to:
• cutting grass in general and in particular close
to kerbs;
• shredding of materials for composting;
• pruning;
• using the machine with the cutting means
above the operator's shoulder level;
• use of the machine for cutting non-plant
material;
• using cutting means other than those found
in the "Technical Data" table. Risk of serious
injury and injuries;
• using of the machine by more than one person.
IMPORTANT Improper use of the machine will
void the warranty and relieves the Manufacturer of
any liability, placing all responsibility for damage
or injury, to him/herself or third parties, on the user.
3.1.3 Type of users
This machine is intended for use by consumers,
i.e. non-professional operators. It is intended for
"hobby-related activities".
3.2 MAIN COMPONENTS (Fig.1 )
A. Engine: supplies the drive power to the
cutting means.
B. Blade
(cutting
designed to cut the vegetation.
C. Front hand grip: used to handle the machine
and equipped with the safety switch.
D. Rear hand grip: used to handle the machine
and equipped with the main control buttons.
E. Blade protection (for machine transport and
handling): protects against accidental contact
with the cutting means that can cause serious
injuries.
F.
Battery (if not supplied with the machine, see
chapter : 13 "optional attachments" device
that supplies electric current to the tool; its
specifications and regulations for use are
described in a specific manual.
G. Battery charger (if not supplied with
the machine, see chapter : 13 "optional
attachments" device used to charge the
battery; its specifications and regulations for
use are described in a specific manual.
H. Rail
I.
Charging dock
J.
Loop
K. Screws and plastic dowels supplied
IMPORTANT The machine works only with both
batteries inserted.
NOTE The batteries can be charged directly on
the machine with its charging dock.
EN - 5
means): the
element
Publicidad
