Descargar Imprimir esta página

Deltafox DP-EHG 2050E Traduccion Del Manual De Instrucciones Originale página 15

Pistola de aire caliente eléctrica

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 64
Never direct the hot air flow at
people or animals.
Do not look directly into the
nozzle opening on the blow-off
pipe.
Do not touch the nozzle when
it is hot.
Maintain distance between the
nozzle outlet and the surface
or workpiece you are working
on. The device could overheat.
Use as a solid fuel lighter / use
of the grill lighter nozzle (11)
Check that the solid fuel lighter
is in the correct position.
Isolate from the mains before
removing it from the fire.
Allow the solid fuel lighter to
cool down before packing it
away.
The connection cable or other
flammable materials must not
come into contact with the hot
parts of the solid fuel lighter.
Caution: This is how to avoid
accidents and injuries by an
electric shock:
Electrical safety
Make sure that the mains volt-
age matches the details on the
type plate.
Connect the device only to a
socket with a residual current
circuit breaker (RCD) with a
tripping current of not more
than 30 mA.
Do not use the mains cable to
pull the plug from the socket.
Protect the mains cable from
heat, oil and sharp edges.
Switch the device off and pull
the mains plug out of the sock-
et if the mains cable is dam-
aged. If the connection cable of
this device is damaged, it must
be replaced by the manufactur-
er or their customer service or
by a similarly qualified person
in order to avoid hazards.
Do not connect a damaged
mains cable to the power sup-
ply. Do not touch a damaged
mains cable as long as it is
connected to the power supply.
A damaged mains cable can
result in voltage-carrying parts
being touched.
Initial start-up
When used for the first time, some smoke
may escape. The smoke is caused by
binders which are removed from the
insulating film of the heater by the heat
during first use. To ensure that the smoke
escapes quickly, the device should be
placed on the stand area. Be sure to
ventilate the working environment
during first use.
If the smoke/odour is too strong, move
the initial start-up to outside!
GB
15

Publicidad

loading