Publicidad
Idiomas disponibles
Idiomas disponibles
6. USE - FUNCTIONS
ATTENTION! LED lamps must not be covered with thermal insulation or other materials.
NOTE! Only turn on the LED lights while the hood is running. Do not turn on the lights to
illuminate the room. Do not touch the LED lamps within 30 minutes after use units.
6.1 Control panel
Via the operating elements you set all the functions of your unit and receive information
about the operating status.
k
On/ Off button
LED light On/Off button/ Light Temperature/ Brightness
k
Button for selecting minimum speed
Button for selecting average speed
Button for selecting maximum speed
Button for selecting Booster and Super-Booster speed
a
AUTO Mode
Air cleaning function
6.2 Starting the unit
Press
The unit starts in ventilation speed 1.
6.3 Adjusting the speeds
Press the desired speed level
Note: The activated speed level will be indicated by means of the LED associated with
the button.
6.4 Stopping the Unit
Press
In standby mode, perform a 0.5-second long press on this button to initiate the fan's operation.
While the fan is operational: briefly press this button to cease the fan's operation; this action
will cause the red LED light to illuminate.
Note: The LED on this button will remain off while the cooker hood fan is operating.
Conversely, it will be illuminated when the fan is not running, and the LED color will be red.
6.5 Boost and Super-Boost speed setting
Short-press the button
operate Boost level for 5 minutes. After this duration, you'll hear a warning beep, and the
speed will promptly revert to level 3 speed. To deactivate the Boost level before the time
elapses, perform a short press on the button
Alternatively, you can directly press the desired speed to disable the Boost level.
While the unit is in Boost level, press and hold the button
this signifies the activation of Super-Boost level. The unit will now run at Super-Boost level for
5 minutes. Following this period, a warning beep will sound, and the speed will immediately
revert to level 3. To cancel the Super-Bboost level before the set time concludes, briefly press
the button
This action will bring the unit back to level 3. Alternatively, directly pressing
the desired speed will also disable the Super-Boost level.
EN
to activate Boost speed; the button will flash slowly. The unit will
23
a
This will return the unit to level 3 speed.
until it begins to flash rapidly;
Publicidad
