Publicidad
Idiomas disponibles
Idiomas disponibles
BATTERY VOLTAGE
TEST
CAUTION:
Do not measure batteries while they are installed
in the devices they are powering. The batteries must be
removed from installations
before tests can be made.
1.
Set the function switch to the
1.5V or 9V BAT switch position.
Use the 1.5V position for 'AAA',
'AA', 'C', 'D', and other 1.5V
batteries. Use the 9V position
for square 9V transistor
batteries.
2.
Insert the black test lead
banana plug into the negative
COM jack.
Insert the red test lead banana
plug into the positive V jack.
3.
Touch the black test probe tip
to the negative side of the
battery. Touch the red test
probe tip to the positive side of
the battery.
4.
Read the voltage in the display.
16
Publicidad
