Publicidad
Idiomas disponibles
Idiomas disponibles
Before The First Use
The packaging must be undamaged. Check the device for transport damage.
Do not connect a damaged device under any circumstances. In case of damage,
please contact the supplier.
Remove transport cover
The unit and parts of the interior are protected for transport. You can remove all
adhesive tapes on the right and left side of the device door as well as any adhesive
residues with cleaning solvent. Remove all adhesive tapes and packaging parts
from the interior of the device as well.
After transport, the device should stand for 12 hours to allow the coolant to collect
in the compressor. Non-observance could damage the compressor and thus lead to
failure of the device.
CAUTION
Set up device
• The ambient temperature affects the power consumption and proper
functioning of the device. Therefore, the device should be placed in a well-
ventilated and dry room with an ambient temperature corresponding to the
climate class for which the device is designed.
• Do not place the device outdoors (e.g. balcony, terrace, garden shed, etc.).
Do not use sharp knives or pointed objects when opening the device.
Please observe the notes when setting up: "Tips for energy saving"
Remove the device doors
• If the unit does not fit through the apartment door, the unit doors can be
unscrewed.
ATTENTION
The unscrewing of the unit doors may only be carried out by the customer
service.
Risk of damage!
EN-31
Publicidad
