Pool Technologie Poolsquad iPO Ampero 8 Instrucciones De Uso página 35

Settings
possible
Overviews
via the
Dashboard
3.5. Keypad
COMMAND KEY
(depending on
the model)
Switching on the electronic unit.
MENU
Turning off the electronic unit (press and hold), provided that no alarm or alert has been
triggered.
Access the menus.
Boost mode activated at 100% for a 24-hour period (with a short start-up period).
BOOST
Pool water temperature displayed for a few seconds (only if the default display is set to
T°C
Direct
pH
Selecting a value or data item.
Cancel a command.
Back to the previous (sub)menu.
Stopping the Boost mode.
Cancelling an alarm or alert (press and release or press and hold, depending on the alarm
or alert).
Command confirmation.
Enter a (sub-)menu.
OK
Acknowledge an alarm or alert (press or press and hold, depending on the alarm or alert).
possible
Free chlorine rate measurement
The dot just to the right of
only displayed when automatic
chlorine injection is in progress.
pH measurement
only displayed when automatic pH
corrector injection is in progress.
A few minutes after turning on, the production and pH regulation start automatically,
provided that these functions are not deactivated and that certain alarms have not been
triggered.
When switching it off, the screen and the green LED turn off, and the red LED comes on.
.
Meaning
Measures the water temperature
FUNCTION
press and hold).
(press and hold).
10