Pool Technologie Poolsquad iPO Ampero 8 Instrucciones De Uso página 41

When the Boost mode is manually terminated or stopped, production continues according to the initial setpoint.
Operation with a cover sensor:
It is impossible to start Boost mode when the cover is closed.
If the cover closes with Boost mode activated, Boost mode stops instantly.
Menu Possible settings
3.7.18. Setting the FCL setpoint
The menu below only appears if the operating mode of the chlorinator is set to "CL".
Menu
From 0.1 to 5 ppm, in increments of 0.1 ppm
3.7.19. Storing the last electrolyte gel fill/change
The electrolyte gel relates to the amperometric probe (see the manual supplied with the probe).
The menu below only appears if the operating mode of the chlorinator is set to "CL".
Menu Sub-menu
3.7.20.
The following menu only appears if the electrolyser operating mode is set to "FCL".
Menu Sub-menu
3.7.21.
compared to the FCL setting for 48 hours default setting).
The following menu only appears if the electrolyser operating mode is set to "FCL".
Menu
From 12 to 96 hrs, in increments of 12 hrs
Default setting
12 hrs
24 hrs
24 hrs
Possible settings
Date of last refill/change
Date of last confirmation
Activation delay after the last refill/change of electrolyte gel
Possible settings
From 30 to 180 days, in increments of 30
Possible settings
Automatic, as soon as the selected
setting is confirmed, with a delay of
a few moments
Principle
=
days
Activation delay after fault detection
Switching on
Default setting
1 ppm
Confirmation
Press twice on OK:
will appear.
Default setting
90 days
Default setting
48 hrs
Switching off
Press
triggered.
16