Pool Technologie Poolsquad iPO Ampero 8 Instrucciones De Uso página 42

3.7.22. Free chlorine level measurement adjustment
The menu below only appears if the operating mode of the chlorinator is set to "CL".
Menu
3.7.23. Manual water injection
Menu Functions
Priming the water
pump
Water
into the cell
Means of checking
the water pump is
operating
correctly
3.7.24. Manual salt injection
Menu Functions
Priming the salt
pump
Salt injection into
the cell
Means
checking the salt
pump
operating
correctly
3.7.25. Bluetooth communication
Menu Setting
Mode
Pairing*
Reset*
* These settings do not appear if the mode is set to OFF.
During a software update (not automatic) on the electronic unit, performed via Bluetooth:
-
Possible settings
From 0.1 to 5 ppm, in increments of 0.1 ppm
Possible settings
injection
From 30 secs to 10
mins,
in 30 s increments
Possible settings
From 30 secs to 10
mins,
in 30 s increments
of
is
Function
Activation/deactivation
Bluetooth communication
Detection of
devices near the electronics
unit (within 60 seconds)
Networking of the electronics
unit and connected devices
Deletion of the
connecting the electronics unit
to the connected devices
Default setting
1 min
Default setting
1 min
Possible settings
of ON (to activate)
OFF (to disable)
connectible
network
Default setting
Current measurement
Instructions
To start injecting:
Confirm the selected setting.
(The peristaltic pump is
running, and the
countdown is displayed in
real time.)
To pause,
and to restart injection:
Press OK.
To stop injection:
Press .
Instructions
To start injecting:
Confirm the selected setting.
(The peristaltic
rotates; and a countdown
timer is displayed in real
time.)
To take a break,
and to restart the injection:
Press OK.
To stop injection:
Press .
Default setting
ON
-
timer
pump
17