Publicidad
Idiomas disponibles
Idiomas disponibles
3. Connect
the other end to their
respective
washer
inlet located
at the rear of
the washer,
Note:
Hot water
needs to be at a temperature
of at least 120°F
- 140°E
(49°C
- 60°C)
for the soap to dissolve
and to avoid soap
residue
remdning
on
clothes.
4. Using the drain hose clamp, attach the drain hose to the unit as shown below.
Install the drain hose hook to the outer drain hose tube.
S
5. Plug in the washer
to a regular
120 volt / 60 Hz, 15 amp
outlet.
15
Publicidad
