Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT: The multifunction button on the
earbuds is highly sensitive. When the earbuds are
turned on, avoid tapping the button by accident.
3.2 Turning your earbuds on or off
1. Press and hold the button on each earbud for
about 5 seconds. The "power on" prompt is
heard and the LED in both earbuds starts
blinking red.
2. As both earbuds synchronize, a prompt is
heard indicating that they are connected.
3. To turn the earbuds off, put them back in the
charging case or press and hold the
multifunction button on either earbud for
about 5 seconds to turn off that specific
earbud. The "power off" prompt is heard and
the LED blinks briefly in red, before shutting off.
4. Advanced operation
4.1 TWS pairing
Simply take the earbuds out of the charging case or
turn them on as previously indicated. The earbuds
sync with each other automatically and then enter
mobile pairing mode.
Note: Before installing this product, please make
sure your device is Bluetooth
®
compatible.
4.2 Pairing the earbuds with your
mobile device
1. Turn both earbuds on by removing them from
the charging case or pressing the multifunction
button for about 5 seconds. Both earbuds will
automatically set on pairing mode.
2. Make sure to place the earbuds and your
phone no more than three feet from each
other.
®
3. Set the Bluetooth
on your mobile device to
"discover". The KTE-007 will appear on the list
of available, ready-to-pair devices. The LED light
blinking on one of the earbuds will indicate it
has entered pairing mode.
4. Tap on KTE-007 and click YES or OK when
the mobile device asks if you want to pair with
it.
5. If pairing is successful the "connected" prompt
is heard, after which the earbud LED indicator
will turn off.
6. If after 60 seconds the pairing process fails, please
repeat steps 1 through 4.
Note: The earbuds automatically go into standby
mode after a short period of inactivity to save
battery life.
7. You only need to pair the earbuds with your
mobile device once, as they will reconnect
automatically every time you turn them back on.
Publicidad
