2N LiftIP 2.0 Manual De Instalación página 3

Configuration
Enter the 2N LiftIP 2.0 IP address into your Internet browser and complete the username Admin and password 2N,
if these default login data have not been changed, to log into the web configuration interface. You can also retrieve
the IP address using the 2N Network Scanner, which helps you locate all the 2N IP devices in the LAN and can be
downloaded freely at 2n.com.
Upon login, complete the destination and user phone number for Alarm call 2 (Calls > Alarm calls > Alarm call 2) for
proper routing. Also, set the count of call cycles in case the call is not confirmed.
!
If the Alarm call 2 destination is empty, no call can be set up.
Tip
The Alarm call 2 events are written into the State > Events configuration menu.
i
Note
One and the same user can be set both for ALARM1 and ALARM2.
Operation
Press "Press to call" shortly on audio unit 2N Voice Alarm Station for activation. A call is set up to the alarm call
destination defined in ALARM2 from 2N LiftIP 2.0.
Note
i
The 2N Voice Alarm Station audio unit does not include a LED for connection establishing indication. A LED is
on on the 2N LiftIP 2.0 audio unit to indicate call setup and connection confirmation.
Hereby, 2N TELEKOMUNIKACE a.s. declares the equipment type 2N LiftIP 2.0 in compliance with directives
2014/30/EU, 2014/35/EU, 2014/33/EU and 2011/65/EU. The full text of the EU declaration of conformity is available
2
at the internet address www.2n.com/declaration.