Publicidad
Idiomas disponibles
Idiomas disponibles
m
=
Q)
r-
o
IT
Pin Assignment
Follow the instructions below to connect the LC50P to a computer.
A. Signal connector: 15-pin mini D-Sub (PS / 2 or PC / AT compatible model)
Connect the signal cable to the 15-pin mini D-Sub connector on the display unit.
B. Signal connector: 15-pin D-Sub (Apple computer)
Convert a MAC 15-pin D-Sub connector to a 15-pin mini D-Sub connector using a Panasonic
MAC adapter, and connect it to the 15-pin mini D-Sub connector on the display unit.
[1 [ Redsignat | 9 |
on —
[2
| Green signal | 19 | Ground —
[ 3 | Buesga | 1 | Gran
[ 4 | Gun
| 12 | SW —
[MICA
PR
Le
[67
BONE
Ere
open
Vertical sync. signal
7
CE Bi signal ground RL
* "VESA's Display Data Channel (DDC) Standard.
Use caution to avoid pinching the fingers when rotating
the screen.
B Rotating Procedures
(D Hold the upper and lower parts of the screen with hands.
(2 Pull the bottom of the screen forward up and tilt it about 30 degrees.
@ Rotate the screen clockwise slowly to portrait orientation.
@) Hold the upper and lower parts of the screen with hands.
@) Lock by pushing the lower part of the screen.
© Use the accessory Pivot? Software.
For details, read the operating manual of the Pivot? Software.
O
&
©
©)
@
LS
Publicidad
