Publicidad
Idiomas disponibles
Idiomas disponibles
4.7. FILLING THE RINSE AID RESERVOIR
EN
1.
Remove the rinse aid reservoir cap by rotating it counterclockwise.
2.
Carefully pour in the rinse aid into the dispenser, whilst avoiding it to overflow.
3.
Close the rinse aid reservoir cap by rotating it clockwise.
NOTE:
■
Clean up any spilled rinse aid with an absorbent cloth to avoid excessive foaming during the
next wash.
Adjusting the rinse aid reservoir
Remove the rinse aid reservoir cap. Turn the rinse aid indicator dial to a number.
The higher the number, the more rinse aid the dishwasher uses.
If the dishes are not drying properly or are spotted, adjust the dial to the next
higher number until your dishes are spot-free. Reduce it if there are sticky
whitish stains on your dishes or a bluish film on glassware or knife blades.
4.8. FILLING THE DETERGENT DISPENSER
1.
Press the release latch on the detergent dispenser to open the cover.
Push latch to open
16
Publicidad
