Qilive Q.6341 Manual De Instrucciones página 28

9. ERROR CODES
EN
If there is a malfunction the dishwasher will display an error code. The following table shows
possible error codes and their causes.
Codes
E1
E3
E4
Ed
Warning:
■ If overflow occurs, turn off the main water supply before calling a service.
■ If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
■ If there is an error code that cannot be solved, please request professional
assistance.
10. USAGE COUNTER
When the power cord is connected, but the dishwasher is not turned on, press and hold the Delay
button for 5 seconds, the dishwasher display will show the usage count.
for 5 Sec.
Example:
632: Show " 000 " for two seconds, then show " 632 " for two seconds, at last it will be off.
9080: Show " 009 " for two seconds, then show " 080 " for two seconds, at last it will be off.
Meanings Possible Causes
Faucets is not opened, or water intake is restricted,or
Longer inlet time.
water pressure is too low.
Not reaching
required Malfunction of heating element.
temperature.
Overflow. Some element of dishwasher leaks.
Failure of
communication
between main circuit Open circuit or break wiring for the communication.
board with display
circuit board.
for 632
2 Sec.
for 9080
2 Sec.
28