Kohler K-10550 Instrucciones De Montaje página 9

Robe Hook
Anchors
Wall Plate
Screws
Large
Mounting
Hole
Setscrew
Escutcheon
9. Install the Robe Hook
Start a setscrew into each post. Do not thread fully into the post.
If included, slide an escutcheon onto the wall plate.
NOTE: The escutcheon sits loosely until the post is in place and the
setscrew is tightened.
Align the robe hook assembly over the wall plate.
Tighten the setscrew with a hex wrench.
10. Install the Glass Shelf
Start a setscrew into each post.
If included, place an escutcheon on the wall plate.
Align a post over a wall plate. Repeat with the other post.
Loosely secure both posts with the setscrews.
Carefully place the shelf into position in the brackets.
Screw the cap down to hold the shelf in place.
Adjust the bracket assembly alignment as needed.
Tighten the setscrews on both the bracket assemblies and the
posts.
Kohler Co.
Glass Shelf
Robe Anchors
Hook
Plate
Screws
Setscrew
9
Cap
Glass Shelf
1023327-2-C