Publicidad
Idiomas disponibles
Idiomas disponibles
Power cord safety tips:
If the supply cord is damaged, it must be replaced by the
manufacturer, service agent or similarly qualified persons in order
to avoid a hazard.
Never pull or yank on the cord or the appliance.
To insert plug, grasp it firmly and guide it into outlet.
To disconnect appliance, grasp plug and remove it from outlet.
Before each use, inspect the power cord for cuts and/or abrasion
marks. If any are found, this indicates that the appliance should
be serviced and the power cord replaced. Please return it to our
Service Department or to an authorized service representative.
Never wrap the cord tightly around the appliance, as this could
cause the appliance to fray and break.
DO NOT OPERATE APPLIANCE if the power cord shows any
damage, or works intermittently and stops working.
During the first few minutes of initial use, a slight odour may be
noticeable. This is normal and will quickly disappear.
HOW TO USE
Important: This appliance is for household use and may be plugged
into any 220-240V ~ electrical outlet (ordinary household current). Do
not use any other electrical outlet.
OFF : To stop the fan.
Speed selection: To start the fan:1-Low, 2-Med., 3-High.
Oscillation OFF/1/2/3 : To start and stop oscillation of the fan.
CARE AND CLEANING
This appliance requires little maintenance and contains no user
serviceable parts. Do not try to fix it yourself. Refer it to qualified
service personnel if servicing is needed.
The fan is permanently lubricated and will not require additional
lubrication for the life of the fan.
TO CLEAN: Before cleaning, turn fan off and unplug from electrical
outlet. Wipe off excess dust with a lint-free cloth. To ensure adequate
air circulation to the motor, keep vents located at the rear of the motor
housing free from dust accumulation. A vacuum cleaner hose can be
used to clean these vents. Do not immerse fan in water or any other
liquid.
Publicidad
