OPERATION
•
Insert the plug into the socket.
•
Pull 1x on the cord to switch on the appliance. The heater runs at 1500 W.
•
Pull the cord again to switch off the appliance.
Note: Although the heater is protected against splashing water, it should not
be used in rain or wet conditions. Always unplug the heater from the power
outlet after use.
CLEANING AND CARE
•
Before cleaning, remove the plug from the socket and allow the unit to
cool completely.
•
Do not use scouring agents or solvents for cleaning and never immerse the
unit in water.
•
Clean the outside with a soft, damp cloth.
•
The device contains parts that are not accessible to the user. Repairs may
only be carried out by qualified specialists.
EN
15