Melchioni Family MF 2119BLS Manual De Instrucciones página 8

WARNINGS FOR BATTERIES
1. Insert the batteries correctly, paying attention to the polarities (+ and -) indicated on the batteries and
on the device.
2. Batteries must not be short-circuited.
3. Do not charge the batteries.
4. KEEP BATTERIES OUT OF THE REACH OF CHILDREN. Ingestion can cause chemical burns, soft tissue
perforation and death. Serious burns can arise within 2 hours of ingestion. Consult a physician immediately.
5. Do not allow children to replace the batteries.
6. Do not force discharge of the batteries. Do not mix new and used batteries or batteries of different types
or from different manufacturers together.
7. Discharged batteries must be removed immediately from the device and disposed of according to the
laws in force.
8. Do not heat the batteries or expose them to heat sources.
9. Do not directly solder the batteries.
10. Do not disassemble the batteries.
11. Do not deform the batteries.
12. Do not throw or dispose of batteries in fire.
13. Do not put in contact with water or moisture, especially if the battery container is damaged.
14. Do not encapsulate or modify batteries.
15. Store unused batteries in their original packaging away from metallic objects. If already removed from
the packaging, do not mix or mix the batteries.
16. If you intend not to use the device for an extended period of time, remove the batteries.
17. Clean the battery contacts and those of the device before inserting the batteries.
18. In the event of battery leaks, avoid any contact with the leaked material; in case of contact, rinse the
affected area with water and consult a doctor.
COMPONENTS
INSTRUCTIONS FOR USE
1. Before using the appliance, make sure it is on a flat and stable surface. Damage may occur if the appliance
is placed on an unstable slope or surface.
2. Set all switches to the "OFF" position, then insert the plug directly into a power outlet. Make sure that the
plug fits securely into the socket.
3. Press "ON/OFF" on the remote control or control panel to start the device.
1. Air intakes
2. Control panel
3. Body
4. Support base