Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions For:
Modular Door Cabinet
24"W x 11.9"D x 23.8"H
SNSC24-ES & SNSC24-WH
Includes:
Hanging Cleat (1)
Dowels (2)
Shelf (1)
Dowel Caps (2)
Shelf Pins (4)
Knobs (2)
Warning & Caution
WARNING: Cabinet supports a maximum weight of 150lbs. Exceeding maximum weight limit
CAUTION: Do not hang from the cabinet.
IF INSTALLING CABINET LEG KIT PLEASE PROCEED TO CABINET LEG
INSTALLATIONS PRIOR TO INSTALLING ANY CABINET.
Cabinet Installation
Installation Instructions for Sheetrock
1.
Determine the desired location for the cabinet.
2.
Locate at least one wall stud and mark its location (Fig. 1).
3.
Place the cabinet in the desired location and secure to wall
through the cabinet's back top cleat using appropriate
hardware (not included) (Fig. 1).
4.
Any dowel holes located on top or bottom edge of cabinet
can be covered with dowel caps (Fig. 2).
Fig. 1
back top cleat
Modular Drawer Cabinet
24"W x 11.9"D x 23.8"H
SNSDC24-ES & SNSDC24-WH
Includes:
Hanging Cleat (1)
Dowels (2)
Dowel Caps (2)
Knobs (2)
will compromise the integrity of the cabinet structure and could cause the cabinet to fail.
wall stud
Modular Open Cabinet
24"W x 11.9"D x 23.8"H
SNSOC24-ES & SNSOC24-WH
Includes:
Hanging Cleat (1)
Dowels (2)
Shelf (2)
Dowel Caps (2)
Shelf Pins (8)
Installation Instructions for Concrete or Brick Wall
1.
Determine the desired location for the cabinet.
2.
Mark the back top cleat of the cabinet with desired
location; drill a hole through the cleat and back of cabinet,
enough to make a mark on the wall (Fig. 1).
3.
Remove cabinet and nish drilling holes in the wall.
4.
Secure cabinet to wall by using appropriate hardware
(not included) (Fig. 1).
5.
Any dowel holes located on top or bottom edge of cabinet
can be covered with dowel caps (Fig. 2).
Fig. 2
2
Leg Kit For Modular Cabinet
10.4"W x 13.1"D x 5.8"H
530406 & 530403
Includes:
Screws (4/leg)
Legs (4)
dowel caps
dowel holes
Publicidad
