Publicidad
Brentwood Assembly Instructions
Fig. 13
6-1/2''
CARRIAGE
BOLT
WOOD LOC
WASHER
Washer
2-1/2'' screws
Loc-Nut
2-1/2'' screw
G. A-Frame Assembly cont.
1. Align EZ-Frame Bracket with carriage bolts on Swing Beam as shown in (Fig. 13).
2. Attach A-Frame beam to Swing Beam using (2) washers and (2) Loc-Nuts and 2 screws as shown in (Fig. 13).
3. Tighten Loc-Nut. Repeat on other bracket.
Note: Examine all hardware after the loc-nuts are fully tightened. If more than two threads are exposed, cut the
excess bolt off with a hacksaw or other suitable cutting tool.
24
Publicidad
