Publicidad
Brentwood Assembly Instructions
Fig. 20c
Fig. 20a
INSTALL THESE TWO
SCREWS FIRST
3/4'' screw
N. Install Canopy.
1. Install canopy as shown in (Fig. 20c).
Note: Make Certain Pleats are facing outward when
canopy is installed.
Note: Canopy will overhang support boards approx.
1-3/4'' on both sides when properly installed.
2. Secure canopy in eight locations (Fig. 20d). Make
certain to install the top two screws first to help center
the Canopy on the frame.
32
Fig. 20d
Washer
3/4'' Screw
3 Per Side
Publicidad
