Publicidad
Fig. 24b
T. Lookout Mountain Attachment:
.
Reposition the wall in the opening of the climbing unit. Center the top of the wall in the opening of the unit.
1
The edge of the wall should be firmly positioned against the climbing unit and the stakes should be inside the
base of the wall. Secure the wall to the rail using four (4) 1'' Truss Head screws as indicated in (Fig. 24b).
Secure the base to the stakes using one 1-1/4" panhead screw per joint.
2.
Place the brace beneath the wall. Position the legs in the holes dug previously and adjust the brace until the
brace lines up with the holes of the wall. Attach the wall to the brace using one 1-1/4" panhead screw per
joint. Square the brace to the ground. Note: The bottom rail of the brace should rest firmly on the ground.
Adjust the grade as required. Fill in each of the holes and level the surrounding grade.
four (4) 1" trusshead screws
37
Brentwood Assembly Instructions
Publicidad
