AEMC Instruments 514 Manual Del Usuario página 17

4.3 AC Volt Measurement
■ Turn the rotary range switch to the
■ Insert red test lead to the red + input jack and the black
lead to the black COM input jack.
■ Choose AC by pressing the AC/DC button.
■ Bring the test probe tips into contact with the test points.
■ If reading is unstable and hard to read, push the HOLD
button and read the measurement.
WARNING: Immediately unclamp the meter
from the conductor under test if overload
is displayed.
Clamp-On Meter Model 514 - User Manual
range.
17