AEMC Instruments 514 Manual Del Usuario página 19

4.5 Resistance Measurement
■ Turn the rotary range switch to the
■ Insert the red test lead to the red + input jack and the
black lead to the black COM input jack.
■ Bring the test probe tips into contact with the sample
under test.
WARNING: Immediately unclamp the meter
from the conductor under test if overload
is displayed.
WARNING: When making a resistance
measurement, make sure that the power is
off (dead circuit), and that all capacitors in the
measured circuit are fully discharged.
Clamp-On Meter Model 514 - User Manual
Ω
range.
19