Publicidad
Idiomas disponibles
Idiomas disponibles
5.4. How to use mesh screening
– Using mesh screening can avoid the attrition between the item and stainless steel tank,
it also can reduce the attrition between items.
– When put the item and mesh screening into the tank, the unit also can clean the mesh
screening, therefore, the mesh screening can absorb 15% ultrasonic energy. (Plastic
basket can absorb 20% ultrasonic energy).
6. OPERATING INSTRUCTIONS
Red
Green
Red
This machine has a circuit protecting it when over heat. When the right red indication
light is on, it means this circuit works. If pressing "ON", the time left will be displayed
but there is no ultrasonic wave. The machine needs to stop working for 15 minutes,
then pressing "ON" and the right green light is on, the machine can work normally.
18
1
Open the lid, put instruments on the shift in line then
put the shift in the tank.
To avoid the scratch and friction of the products,
do not overlap them.
Add the water in the stainless steel tank, the water should
over the surface of the product but within the range of MIN
mark and MAX mark.
2
Insert one side of the detachable plug and cord into the body
of the machine, the other to the socket. (See picture).
180s will be displayed when the power is on. Press "ON",
it begins cleaning. 180s is the most common working cycle.
During cleaning, the time displayed on the screen
is the time left.
By pressing "SET", you can choose 5 optional working cycle:
90S / 180S / 280S / 380S / 480S
3
Press "ON" button to start cleaning while the right green
indication light is on.
During cleaning, you can hear the "BUZZ" voice;
it means the unit is working.
When the timer counts down "000", the unit will
automatically stop. If required you can stop / pause the
cleaning process at any time by pressing the "OFF" button,
pressing the "ON" button again will resume the cleaning and
the countdown will continue. When cleaning has fi nished,
you can repeat the process by pressing "ON" button again.
Publicidad
