Publicidad
Idiomas disponibles
Idiomas disponibles
Green
0 8 6
0 8 6
7. USER MAINTENANCE
4
Using the HEATER function.
Pressing the TC button starts the built in heater. The red LED
on the left of the control panel will illuminate. The water will
heat to a maximum of 65°C.
Please refer to the point of four di erent ways of cleaning
for details.
If required, you can stop / pause the cleaning process
at any time by pressing the "OFF" button, pressing "ON" again
will resume the cleaning and the countdown will continue. The
program can be reset at any time by pressing the "SET" button.
5
When cleaning is fi nished, unplug it and open the lid,
then take out the item. Put away the water from stainless
steel tank and wipe it up.
1
This machine has taken several protective measures
to the circuit, but if working without water (over 20 seconds)
will short the life of the machine.
Damage will be occurred if works without water.
2
This machine has a protective circuit when it overheats.
It is recommended 15 minutes break, between 3 working
continuous cycles.
3
Unplug and empty the unit after using.
Do not keep water in the tank for a long time.
19
Publicidad
