Publicidad
Idiomas disponibles
Idiomas disponibles
3
Close the battery
compartment
lid.
4
Connect the supplied
AC power
adaptor
to the transmitter.
Transmitter
to an AC outlet
ACpower
adaptor
_
(supplied)
"_
housing
,
J
Left housing
When
the
indicator
does
not
light
in
green
Check if the right and left headphones
are restecl
on the transmitter
correctlv.
The indicator
will
not light up if the headphones'
contact point does
not meet the transmitter's
contact pin. Remove
the headphones
and replace them on the
transmitter
again so that the indicator
lights in
green.
To recharge
the
headphone
battery
after
use
Place the headphones
on the transmitter
after
use. Since the built-in
timer recognizes
when
charging
is complete,
there is no need to remove
the headphones
from the transmitter
after
charging.
to DC IN 9V jack
5
Rest the headphones
on the
transmitter
so that the
headphones'
contact point
meets
the transmitter's
contact pin while
making
sure that the charging
indicator
lights
in green.
Charging
is completed
in about 16
hours and the charging
indicator
goes
off.
When placing
the headphones
on the
transmitter,
be sure to hold them level
with both hands and that the right and
left housings
are placed straight
down
on the transmitter,
and then tilt them
back as illustrated
above.
Notes
• The transmitter
automatically
turns off while charging
the batteries.
• This system
is designed
to charge only the supplied
rechargeable
batteries
type BP-HP550
for safety. Note
that other types
of rechargeable
batteries
cannot
be
charged
with this system.
• If dry batteries
are installed,
they cannot
be charged.
• Do not attempt
to use the supplied
BP-HP550
rechargeable
batteries
for other components.
They are
for use with this system
only.
• Charge
in an envi{'onmenta[
temperature
of between
0°C and 40°C (between
32°F and 104°F).
continue to next parle
5cB
Publicidad
