Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT OPERATION
Remote Control (Cont'd)
1. Stop Button
Stops all wash and dry functions
currently operating.
2. Rear Wash / Move Button
Press once to initiate a 2-minute rear
wash. Press again to initiate nozzle
oscillation (repetitive forward and
backward nozzle movement).
3. Front Wash / Move Button
Press once to initiate a 2-minute front
wash. Press again to initiate nozzle
oscillation (repetitive forward and
backward nozzle movement).
4. Strong Wash / Move Button
Press once to initiate a 2-minute strong
wash. Press again to initiate nozzle
oscillation (repetitive forward and
backward nozzle movement).
5. Dry Button
Press once to initiate a 2-minute warm
air dryer cycle.
6. Nozzle Position Side Button
Press the left side button up or down
to adjust the nozzle position forward
and backward during a wash cycle. The
5 LED indicator lights will indicate the
different positions selected.
7. Nightlight Button
Press to turn the nightlight ON/OFF and
to change the color of the nightlight.
8. Seat Temperature Button and Indicator
Press to adjust the seat temperature to
1 of 4 settings (green/low: 93.2°F,
yellow/medium: 98.6°F, red/high: 104°F,
and OFF). Settings will be saved for the
next use.
9. Nozzle Cleaning Button
Press to initiate nozzle cleaning when
not sitting on the seat, or when the seat
sensor is deactivated. For more nozzle
maintenance instructions, see page 26.
10. Deodorizer Button
Deodorizer is defaulted to automatically
turn on when seated (indicator light
is ON). Press button to turn the auto
deodorizer off (indicator light is OFF).
See page 20 for more instructions.
11. Water Temperature Button and
Indicator
Press to adjust the water temperature
to 1 of 4 settings (green/low: 93.2°F,
yellow/medium: 98.6°F, red/high: 104°F,
and OFF). Settings will be saved for the
next use.
12. Gentle Wash Button
Press to initiate a gentle wash cycle
followed by a dry cycle. See page 19 for
`more instructions.
13. Water Pressure and Dry Temperature
Side Button and Indicators
Press the right-side button + or – to
adjust the water pressure during a wash
cycle. Press the same button + or – to
adjust the dry temperature during a
dry cycle. The 5 LED indicator lights
will indicate the different positions
selected. Settings will be saved for the
next use.
14. Five LED Indicator Lights
Indicator lights for Level 1 to Level
5 from left to right indicate nozzle
position, water pressure, and dryer
temperature level settings when those
buttons are pressed.
15. Memory User 1 and User 2 Buttons
Press User 1 or User 2 to initiate
preferred settings for a wash. User can
set nozzle position, water pressure,
oscillation, water temperature, and seat
temperature settings to memory. See
page 21 for more instructions.
17
Publicidad
