Silverline 244980 Traducción Del Manual Original página 4

EN
Introduction
Thank you for purchasing this Silverline product. This manual contains information necessary for safe
and effective operation of this product. This product has unique features and, even if you are familiar
with similar products, it is necessary to read this manual carefully to ensure you fully understand
the instructions. Ensure all users of the product read and fully understand this manual. Keep these
instructions with the product for future reference.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Caution!
DO NOT use with compressed gas cylinders!
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools should not be disposed of with household waste. They contain traces of
oil and other lubricants. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
4
Original Instructions
Technical Abbreviations Key
n
No load speed
0
psi Pounds per square inch
bar Metric Unit of Pressure
L/min
Litres per minute
Ø
Diameter
cfm Cubic feet per minute
min Revolutions or reciprocations per minute (rpm)
-1
BSP British Standard Pipe (thread)
dB(A) Decibel sound level (A weighted)
m/s Metres per second squared (vibration magnitude)
2
Specification
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3bar (90psi)
Air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112L/min (4cfm)
Air inlet . . . . . . . . . . . . . ⁄ " BSP supplied with two male airline Quick Connectors
1
4
Minimum hose diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5mm (
No load speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1800min
Max cutting capacity (Steel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.0kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound pressure L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88dB(A)
PA
Sound power L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98dB(A)
WA
Uncertainty K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3dB(A)
Vibration level a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5m/s
h
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
Nibbler Tool Safety Warnings
WARNING: Read and understand the safety instructions before installing, operating, repairing,
maintaining, cleaning, changing accessories on, or working near this tool. Failure to do so can result
in serious injury.
Save all warnings and instructions for future reference.
WARNING: This appliance is not intended for use by persons (including children) with
reduced physical or mental capabilities or lack of experience or knowledge unless they have been
given supervision or instruction concerning use of the tool by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the tool.
• Only qualified and trained users should install, adjust, or use the tool.
• Do not modify the tool. Modifications can reduce the effectiveness of safety measures and
increase the risks to the user.
• Do not discard the safety instructions; give them to the user.
• Do not use the tool if it has been damaged.
• Inspect the tool periodically to verify that the ratings and markings required by ISO 11148
(detailed in the Description of Symbols) are legibly marked on the tool. The user (and employer
if appropriate) should contact the manufacturer to obtain replacement marking labels when
necessary.
• Compressed air can cause severe injury.
• Always disconnect the tool from the air supply when not in use.
(EN-6 'UK' and EQ-4 'European' types)
⁄ ")
3
8
-1
2