Publicidad
Idiomas disponibles
Idiomas disponibles
1. The angle of the power head can be set to 8 different working positions.
2. Press the Adjust button (there is a "PUSH" on it) with one hand and turn the power head to the
appropriate position. The Adjust button locks the handle automatically (see Figure 4)).
Adjusting the length of the mast
The trimmer has a telescopic mast that extends from 1.85 metres (fully retracted) to 2.45 metres (fully
extended). The clamp with locking button is used to hold the pole in position at any extended length.
1. To extend the pole, loosen the locking knob (see figure 5). The pole will slide freely.
2. Pull the old pole section to the desired length of the extension. Note: Only extend the pole to
the minimum length required to reach the limb that is being cut.
3. To lock the pole, tighten the locking knob (seeFigure 5)).
Starting the pole hedge trimmer:
Publicidad
