2. PROPER USE OF FREEZER
2.1 PLACEMENT
•
Before using the freezer, remove
all packaging materials including
bottom cushions and foam pads
and tapes inside the freezer, tear
and the freezer body.
•
Keep away from heat and avoid
direct sunlight. Do not place the
freezer in moist or watery places
to prevent rust or reduction of
insulating effect.
•
The freezer should be placed in a
well-ventilated indoor place; the
•
The top space of the freezer shall
be greater than 70cm, and the
distances from both sides and
backside shall be more than 20cm
to facilitate heat dissipation.
LGUM-100-05新平台电控冷柜.indd 11
IMPORTANT:
Precautions before installation: Before
installation or adjusting of accessories,
it shall be ensured that the feezer is
disconnected from power.Precautions
shall be taken to prevent fall of the
handle from causing any personal injury.
2.2 ENERGY SAVING TIPS
•
The appliance should be located
in the coolest area of the room,
away from heat producing
appliances or heating ducts, and
out of the direct sunlight.
•
Let hot foods cool to room
temperature before placing in
the appliance. Overloading the
appliance forces the compressor
to run longer. Foods that freeze
too slowly may lose quality, or
spoil.
•
Be sure to wrap foods properly,
and wipe containers dry before
placing them in the appliance. This
cuts down on frost build-up inside
the appliance.
•
Appliance storage bin should not
be lined with aluminum foil, wax
paper, or paper toweling. Liners
interfere with cold air circulation,
making the appliance less
•
Organize and label food to reduce
door openings and extended
searches. Remove asmany items
as needed at one time, and close
the door as soon as possible.
EN-9
2021-8-24 14:42:41