Edesa EZH-4211/A Manual De Instrucciones página 15

Lock/ Unlock
key is in lock state by default; it is
required to operate after unlocking.
•
Lock: after pressing the super-
freeze key "
3s, the display area will blink once,
and the set temperature will take
effect immediately, once entering
lock state, the display area will not
blink; after no-key operation for
30s, it could also enter automatic
lock state, and the display area
will blink once.
•
Unlock: after pressing the super-
freeze key "
3s, the display area will blink once
to unlock. Under the lock state,
it is required to conduct key
operation after unlock.
IMPORTANT:
The various following key operations
shall be implemented under unlock state
LGUM-100-05新平台电控冷柜.indd 15
" for continuously
" for continuously
EN-13
Fahrenheit and centigrade
temperature conversion
•
By long pressing the tempering
key " " for 3s, Fahrenheit
and centigrade temperature
conversion could be implemented.
When the centigrade temperature
is displayed, the centigrade
temperature indicator lamp
on; and when the Fahrenheit
temperature is display, the
Fahrenheit temperature indicator
lamp in the display area will be on.
Temperature Setting
(For settings of -30°C/-22°F, an
ambient temperature of 25°C/77°F
or less is recommended)
•
By pressing the tempering key "
", the display window will display
the refrigerator temperature, by
pressing the tempering key"
"once every time, the refrigerator
temperature will change 1 degree
Celsius/Fahrenheit;
2021-8-24 14:42:42