Silverline 282400 Manual De Instrucciones página 11

Accessories
• A full range of accessories including nails is available from your Silverline stockist.
• Spare parts can be obtained from toolsparesonline.com.
Maintenance
WARNING: ALWAYS disconnect the tool from the power supply before carrying out any
inspection, maintenance or cleaning.
General inspection
• Regularly check that all the fixing screws are tight. They may vibrate loose over time.
Cleaning
WARNING: ALWAYS wear protective equipment including eye protection and gloves when
cleaning this tool.
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly, and
shorten the tool's service life. Clean the body of the tool with a soft brush or dry cloth.
IMPORTANT: There is very little that can go wrong with your air tool, and it should be noted that
when an air tool fails to work it is generally because the internal workings have corroded due to
dirty, wet air and failure to follow the instructions given below.
Daily maintenance procedure
• If an inline lubricator is not fitted to the air supply, the tool must be manually lubricated:
1. Disconnect from the air supply.
2. Pour 3-4 drops of oil into the air intake.
3. Reconnect the air supply and operate the machine several times to lubricate all internal
workings.
• If the machine is in constant use or used for long periods at a time, repeat the above procedure
up to 3 times per day.
• Use air tool oil. DO NOT UNDER ANY CIRCUMSTANCES USE NORMAL ENGINE OIL.
• Failure to comply with the operating and maintenance instructions may invalidate the guarantee.
Clearing jams
• Using the Hex Keys (11) and a 10mm spanner (not supplied), the magazine can be disassembled
to clear blockages or jams.
1. Unscrew and remove 2 x Magazine Hex Screws (3) either side of the magazine, using the 4mm
Hex Key (12) (Fig. VI).
2. Unscrew and remove Magazine Hex Screw and Nut (8) using the 3mm Hex Key (14) and a
10mm spanner (not supplied) (Fig. VI).
3. Slide the magazine out of the nailer (Fig. VII).
4. Clear any obstruction.
5. Reassemble all parts, in reverse order to removal and ensure all screws/nuts are tightened
correctly.
Air Framing Nailer 90mm
Storage
• Store this tool carefully in a secure, dry place out of the reach of children.
Contact
For technical or repair service advice, please contact the helpline on (+44) 1935 382 222
Web: www.silverlinetools.com
UK Address:
Toolstream Ltd.
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
EU Address:
Toolstream B.V.
Hogeweg 39
5301 LJ Zaltbommel
The Netherlands
Disposal
• As with other power tools, air tools should not be disposed of with household waste.
• Air tools may contain traces of tool oil and other lubricants and so must be recycled accordingly.
• Contact your local waste disposal authority for information on the correct way to dispose of
power tools.
silverlinetools.com
11