4.5
Instructions for charging the battery
3
2
Fig. 3
Charge the battery
Charge the device as follows before first use:
Plug the cable into the connection socket (2) of the device.
X
Make sure the device's on/off switch (3) is turned off.
X
Plug the power supply unit (1) into a socket.
X
When the device is fully charged, the three LEDs of the charge status indicator light up blue (see
also "Charge status display").
NOTE!
Only use the original power supply included.
No guarantee can be given in the event of damage due to non-use of the original power
supply.
5
Transport, packaging and storage
Check the delivery on receipt immediately on completeness and damage in transit.
NOTE!
Complain any damage as soon as you discover it. Claims for damages only may be
made within the valid time.
For the packaging, just non-polluting material is being used.
The packaging is to protect the individual components from transport damage, corro-
sion and other forms of damage prior to use.
Store the clipper and accessories as follows:
Always store in the packaging supplied with it.
X
Do not store outdoor.
X
Store dry and dust-free.
X
Protect against solar irradiation.
X
Avoid mechanical shocks.
X
Storage temperature: 0 until 40°C.
X
Relative humidity: max. 75%. When storing longer than 3 months, check periodically the gen-
X
eral condition of all parts. If necessary, refresh or renew the conservation.
10
1
Translation of the original instructions / Hair clippers
1
Power supply unit
2
Connection socket
3
On / Off switch