EN
28
TROUBLESHOOTING
Problem
The unit doesn't
operate.
The dehumidifying
function doesn't work.
No air is discharged.
Operation is noisy.
Possible Cause
Has the power cord been
disconnected?
Is the tank full indication
lamp blinking? (The
tank is full or in a wrong
position.)
Is the temperature of
the room above 35 °C or
below 5 °C?
Is the air filter clogged?
Is the intake duct or
discharge duct
obstructed?
Is the air filter clogged?
Is the unit tilted or
unsteady?
Is the air filter clogged?
Solution
Plug the power cord into
the outlet.
Empty the water in the
drainage tank and then
reposition the tank.
The protection device is
activated and the unit
cannot be started.
Clean the air filter
as instructed under
"Cleaning the
dehumidifier".
Remove the obstruction
from the discharge duct
or intake duct.
Clean the air filter
as instructed under
"Cleaning the
dehumidifier".
Move the unit to a
stable, sturdy location.
Clean the air filter as
instructed under
"Cleaning the
dehumidifier".