Medion LIFE P13242 Manual De Operación página 179

5. Device overview
5.1. Front
MD 30042:
3
MD 30043 / MD 30044:
3 2
1. Screen
2. : Switch the device on and off
3. Infrared sensor: Reception field for the infrared re-
mote control signals.
Operating light: lights up when the device is in stand-
by mode.
5.2. Rear and right-hand side
11
SPDIF
10
Optic. out
R L
Video
BACK AV IN
1. COMMON INTERFACE (CI+): Card slot for connecting
pay TV cards
2. USB (5 V , 500 mA max.): USB connection for me-
dia playback/recording (PVR)
2
1
1
5
1
6
USB
13 Vdc/18 Vdc
2
5Vdc
Max. 500mA
7
USB
2
8
5Vdc
Max. 500mA
3
9
4
3. HDMI 1: HDMI port for devices with HDMI output
4. : For connecting headphones with 3.5 mm jack
5. HDMI 2-3: HDMI connection for devices with HDMI
output (HDMI 2 can be used for ARC)
6. LNB (13 V/18 V , 300 mA max.): For connecting
the antenna (satellite)
7. ANT.: For connecting the antenna (analogue, DVB-T or
DVB-C)
8. VGA: VGA port for connecting a PC or a YUV adapter
(optional)
9. BACK AV IN: Audio/video input (cinch)
10. SPDIF optic. OUT: Digital audio output (optical)
11. LAN: Network connection for connection to the Inter-
net
13
12
12. Connection for mains plug
.
Please only use the mains connection cable
supplied for this purpose.
14. Fixing holes for a wall mount
MD 30042: Vesa standard, hole spacing 75 x 75 mm
MD 30043 / MD 30044: Vesa standard, hole spacing 100
x 100 mm
.
Wall mount not supplied. When mounting the
device, make sure that you use M4 screws. The
maximum length of the screws corresponds to
the thickness of the wall mount plus 7 mm.
The TV must not be mounted at heights ex-
ceeding 2 m. The device must be mounted on
a solid surface such as cement or concrete.
EN
9