Kohler K-31404-HW1 Instrucciones De Instalación página 4

1. Prepare the Site
23" (584 mm)
Drain Location
NOTICE: Measure your product for site preparation. Note the model number on the packaging label, then visit the
product page at kohler.com
NOTICE: Provide adequate floor support.
Determine the location of the bath.
Make sure the subfloor is level and offers adequate support for the bath.
Verify that the finished floor is level before proceeding.
Brass Installation
Insert the drain body into the bath.
Measure the distance "X" between the bottom of the drain body and the floor.
Cut the pipe to extend "X" height above the floor.
PVC Installation
Insert the drain body into the bath.
Thread on a 1-1/2" 11-1/2 NPSM PVC adapter.
Measure the distance "X" between the bottom of the adapter and the floor.
Cut the pipe to extend "X" height above the floor.
1476139-2-A
25-1/4"
(641 mm)
Finished Floor
for more information.
4
Drain Pipe
X
Kohler Co.