Publicidad
Idiomas disponibles
Idiomas disponibles
4. Complete the Installation
CAUTION: Risk of property damage. Make sure that a watertight seal exists on all drain connections.
NOTE: The drain cover is included in a small box located within the carton.
NOTE: To ensure proper drain cover operation, the gasket must sit below the drain body slots.
CAUTION: Risk of personal injury. The edges of drain flange openings may be sharp.
NOTE: Make sure there is no interference with the drain flange openings.
For Brass Installation: Apply sealant tape between the drain flange and the drain pipe to create a watertight seal.
For PVC Installation: Apply 100% silicone sealant between the drain flange and the 1-1/2" 11-1/2 NPSP adapter to
create a watertight seal.
For PVC Installation: Apply PVC glue between the 1-1/2" 11-1/2 NPSM adapter and PVC pipe to create a watertight
seal.
Install the drain flange onto the drain pipe.
Insert the drain cover into the drain flange.
Press the drain cover several times to make sure the drain opens and closes properly.
If desired, apply a thin, continuous bead of clear or color-matched silicone sealant to the seam between the bath and
the finished floor.
Install the bath filler following the faucet manufacturer's instructions.
Close the bath drain.
Fill the bath to the overflow and check the drain connections for leaks.
Kohler Co.
Drain Cover
Drain Flange
Drain Pipe
7
Apply sealant.
1476139-2-A
Publicidad
