Analog Voltage Regulators Terminology; Block Diagram; Trimpots Function; Statement Of Led'S - WEG AVR-A-OPT-07 Manual De Instalación, Operación Y Mantenimiento

6. ANALOG VOLTAGE REGULATORS TERMINOLOGY

1- Analog Voltage Regulator. [OPTIMUS TECHNOLOGY].
2- Sequence defined by the manufacturer.
3- Nominal voltage feedback.
4- Power supply voltage.
5- Rated current field.
6- ENC = Encapsulated.
CC = Metallic Box.

7. BLOCK DIAGRAM

Reference value
Analog input
± 9 Vdc

8. TRIMPOTS FUNCTION

Vad: Voltage Adjustment.
Stb: Stability Adjustment.
U/F: Adjusting the beginning of the range of the Protection U/F= Constant.
Drp: Droop adjustment.

9. STATEMENT OF LED'S

OK: Regulator is on
Oexc: On: Under stress acting
Off: Over voltage not acting.
Hz: ON: U/F acting.
Off: U/F not acting.
10.

TRIMPOTS ADJUSTMENT

Vad: Turning clockwise increases the voltage and counterclockwise decreases.
Stb: Turning clockwise slower response and faster counter-clockwise.
U/F: Rotating clockwise decreases the range of U/F and counterclockwise increases.
Drp: Turning clockwise increases the reactive compensation range and counterclockwise decreases.
Note: Of the regulators encapsulated version, can be connected potentiometer for fine voltage adjustment (5kΩ/3W,
preferably 10 laps) on terminals with this symbol
1 2
07
07E
AVR-A-OPT -
07/T
+
PID
- +
+
U/F
Sensing
DROOP
Figure 7.1: Block diagram
.
Automatic Voltage Regulator – AVR-A-OPT-07 / AVR-A-OPT-07E / AVR-A-OPT-07/T l 13
3 4 5 6
ENC
10A
XXX XXX
CC
self-priming
Power stage
stage.
www.weg.net
Excitation field
G