Publicidad
Idiomas disponibles
Idiomas disponibles
C13. Alarm symbol
C14. Set temperature values, programmed on/off timer
C15. Timer symbol
C16. Timer indicator
C17. Selected temperature scale indicator
CONTROL PANEL OPERATION
TURNING THE APPLIANCE ON AND OFF
Insert the plug in the socket. Two dashes appear on the display
indicating that the appliance is in stand-by.
Touch the
(C1) key to turn ON the appliance.
The flap A1 will open after few seconds. When the appliance
comes ON the last function set before it was shut off is activated.
Please note: If start-up is not continued, after a few minutes
the display light dims in order to reduce energy consumption.
To turn the appliance off, touch the
plug.
Please note: Never turn off the air conditioner by simply pulling
the plug. Touch the
key in order to put your air conditioner in
stand-by and wait a few minutes before pulling the plug. In this
manner, the appliance can perform the operating status checks.
MODES SELECTION
AIR CONDITIONING MODE
key and then pull the
To select the desired operating
mode, touch repeatedly the MODE
key (C2) until the desired function
is selected.
This is ideal for hot and humid
weather when the room needs to
be cooled. This function also helps
dehumidify the air.
To correctly set this mode:
• Touch repeatedly the MODE
key (C2) until the air condition-
ing
symbol appears. The
display will show the desired
temperature.
• To change the temperature to
be reached, touch the
or
(C4) key.
•
Select the desired fan speed by touching the
The speeds available are:
Minimum speed: when maximum silent
operation is desired.
Medium speed: when the noise level needs to
be low but with a good comfort level.
Maximum speed: to reach the desired
temperature as soon as possible.
Auto
best fan speed based on the temperature select
ed and the environmental conditions.
DEHUMIDIFYING MODE
Touch repeatedly the MODE key (C2) until the dehumidify-
•
ing symbol appears.
•
The appliance will automatically choose the best air flow.
FAN MODE
•
Select the desired air flow by pressing
The air flows available are:
Minimum air flow: when most silent operation
is desired.
Medium air flow: when the noise level needs to
be low but with a good comfort level.
Maximum air flow: for maximum performance.
(C3)
7
:
the appliance automatically chooses the
This is ideal for reducing humidity in
the room (spring and autumn, damp
rooms, rainy periods, etc). For this
type of use, the appliance must be set
up as for air conditioning mode. That
is, the air exhaust hose (B2) must be
fitted to the appliance to allow the
humidity to be discharged outside.
To correctly set this mode:
When using this mode, the air ex-
haust hose (B2) does not need to be
attached to the appliance.
To correctly set this mode:
• Touch repeatedly the MODE
(C2) key until the fan
bol appears.
(C5) key.
sym-
button (C5).
Publicidad
