SANNOVER Astios 1000 W Guia Del Usuario página 36

EN
Note: For the program mode, mode setting and mode selection is separated. If you want to set
the program mode, press + & - together to enter setting menu to choose program mode setting
and press OK to enter setting interface. For details, please refer to part 2 of "Program mode
setting" under section III "Setting menu".
3. Fil-pilote mode:
Press OK button to choose mode (Program modes or Fil pilote mode). Under Pilot mode,
select the mode via the external control (for France only).
If the working interface is at Program mode, press and hold OK button for 3 seconds, the
appliance will shift from Program mode to Fil pilote mode.
For other countries except France, if you choose mode Fil pilote P, the appliance will work at
comfort mode as default.
Under Fil pilote mode (for France only), when the external controller is programmed, the display
shows:
4. Window detection function
Press OK button to enter window detector function . The appliance will enter comfort mode
as default. If temperature decrease detected, the appliance will automatically enter anti-freeze
mode. If temperature rises up, the appliance will go back to comfort mode. You can press OK
button to choose other modes, or press standby button to enter standby mode.
REMARKS: under window function, pilot control is not available.