Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL GRILLE & BULBS
6. Finish ceiling.
Install ceiling material. Cut out ceiling material closely
around housing.
7. Remove
light lens
from grille.
Insert a small
flat-bladed screw-
driver into the slot
at one end of the
light lens. Care-
fully pry the lens
out.
8. Plug-in
light.
Hold grille as-
sembly up near
housing. Connect
light plug from
grille assembly to
receptacle inside
of housing.
9. Attach grille.
Remove the (2)
grille mounting
screws from the
sides of the hous-
ing. (See Step 8
illustration.) Use
these screws to
attach the grille
to the housing as
shown.
To avoid damage
to the grille: DO NOT OVERTIGHTEN SCREWS. Tighten
screws only until grille is snug against ceiling material.
GRILLE MOUNTING
SCREWS
10. Install
bulbs.
The unit
accepts (2)
18-Watt 3500K
(maximum),
GU24 based
fluorescent
bulbs and (1)
7-Watt night
light bulb.
11. Attach
light lens.
Hook the tabs
on one end of
the lens into the
slot in the grille.
Lift other end
of lens up and
snap into place.
MODEL QTX110HFLT
Page 3
Publicidad
