Publicidad
Idiomas disponibles
Idiomas disponibles
Radiant Glass Cooktop
Throughout this manual, features and appearance may vary from your model.
The radiant cooktop features heating units beneath a
smooth glass surface.
NOTE: A slight odor is normal when a new cooktop is
used for the first time. It is caused by the heating of new
parts and insulating materials and will disappear in a
short time.
NOTE: On models with light-colored glass cooktops, it is
normal for the cooking zones to change color when hot
or cooling down. This is temporary and will disappear as
glass cools to room temperature.
The surface element will cycle on and off to maintain
your selected control setting.
It is safe to place hot cookware (from the oven or
surface) on the glass cooktop when the surface is cool.
Even after the surface elements are turned off, the
glass cooktop retains enough heat to continue cooking.
To avoid overcooking, remove pans from the surface
elements when the food is cooked.
Avoid placing utensils that could become hot or plastics
that could melt on the surface element until it has cooled
completely.
the cleaning cream or full strength white vinegar.
Surface Elements
How to Set
either direction to the setting you
want. When the control is in any
position other than Off, it may be
rotated without pushing it down.
At Off, Hi, Lo and Simmer,
the control clicks into position.
You may hear slight clicking sounds during cooking,
indicating the control is keeping the power level you set.
The controls for the radiant surface elements can be set
anywhere between Lo or Simmer and Hi for an unlimited
number of heat settings. With the infinite switch, the
element cycles on and off to maintain your selected
control setting.
The On indicator light will glow when any surface
element is on.
6
on the cooktop. The cleaning cream will remove this
discoloration.
drop onto the cooktop, they can cause damage.
Always use cookware.
A Hot Surface indicator light will glow when any radiant
element is turned on and will remain on until the surface
is cooled to approximately 150°F.
NOTE:
approximately 150°F.
finish cooking.
Always place the pan in the center of
the surface unit you are cooking on.
the cooktop because it can
is scratch-resistant, not
scratch proof.
49-2001051 Rev. 0
Publicidad
