Amplicomms DB 110plus Manual De Instrucciones página 13

3. Open the hearing aid battery cover to expose the battery. You can
remove the batteries during the drying / refreshing cycle. Remember to
replace the batteries in your hearing aid after completion of the drying /
refreshing cycle.
4. Place hearing aids in the main compartment (1) and close the cover.
5. Press ON / OFF button (5) to start the selected drying time. The indicator
(6) is ON.
Important notes:
This product helps to dry excess moisture from hearing aids and CI
receivers using gentle heat. The UV light function helps reduce bacteria
growth. The product does not clean your instrument. Cleaning from
solid debris must still be done separately in accordance with your hear-
ing aid manufacturer's instructions.
The frequency of using the product is a personal preference. You may
use the product daily, weekly, or as often as you find appropriate. This
also differs according to the type of instrument you use.
Use the 3 timer settings to determine the most suitable length of treat-
ment for your device. This differs from one instrument to another, and
depends on varied factors such as humidity level present, type of instru-
Helpline UK 0844 800 6503
(See page 14 for costs and hours of operation)
O A
PERATION NHANG
9