Digital Lcd Voltmeter (Battery Status) - Wagan Tech CASE 800 Manual De Usuario

Battery status:
When charging,
the bars will flash
AC charger connected

Digital LCD Voltmeter (Battery Status)

The Digital LCD Voltmeter provides the user with the current charge state of the internal battery. It is
the user's responsibility to periodically monitor the battery charge and to recharge the battery after
each use. Recharge every three months even if the Solar e Power Case is not used.
NOTE: Battery status (voltage) is accurate with Charging Adapters disconnected
1. Press and hold the Battery Status Push-Button for 3 seconds.
2. The Digital LCD Voltmeter (Battery Status meter) will display the battery voltage.
Bars displayed
5
4
3
2
1
1 flashing
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
USB output on
Inverter output on
BATTERY
FULL
Solar panels
connected
Total combined power output
Voltage
> 12.5V
> 12.3V
> 12.0V
> 11.7V
> 11.0V
> 10.0V
©2018 Wagan Corporation. All Rights Reserved.
12V DC output on
OUTPUT
MAX
12V
DC
WATTS
FUSE AC!
Low Battery
BATTERY
FULL
AC output:
Total power
as a % of 800W
Battery depleted:
Recharge
immediately
12V
DC
WATTS
FUSE A
9