Worx Nitro WG893E Manual Original página 11

High speed
Low speed
Aluminum
2. COMPONENT LIST
TRIGGER LOCK SWITCH
1.
TOOL-FREE BLADE RELEASE LEVER
2.
TOOL-FREE BLADE CLAMP SLOT
3.
LED LIGHT
4.
WOOD CUTTING BLADE
5.
REMOVEABLE BRANCH HOLDER
6.
METAL CUTTING BLADE
7.
ON/OFF TRIGGER SWITCH
8.
BATTERY PACK *
9.
BATTERY PACK RELEASE BUTTON
10.
* Not all the accessories illustrated or described are
included in standard delivery.
3. TECHNICAL DATA
Type WG893E WG893E.X (893-designation of
machinery, representative of Reciprocating Saw)
Voltage
No-load speed
Stroke length
Wood
Cutting
Steel
capac-
Aluminium
ity max
PVC Pipe
Machine Weight
(Bare tool)
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial
20V Cordless Brushless Compact
Reciprocating Saw
WG893E WG893E.X**
20V Max***
0-3000 / min
26 mm
80 mm
10 mm
15 mm
50 mm
1.8 kg
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
SUGGESTED BATTERIES
AND CHARGERS
Category Model
20V Battery WA3639
20V Charger WA3802
We recommend that you purchase your accessories
from the same store that sold you the tool. Choose
the type according to the work you intend to
undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
NOISE INFORMATION
A weighted sound pressure L
K = 5 dB(A)
pA
A weighted sound power L
K = 5 dB(A)
wA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value
a
Cutting boards
h,B
Uncertainty K = 1.5 m/s²
Vibration emission value
Cutting wooden
a
h,WB
beams
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared noise
emission value have been measured in accordance with
a standard test method and may be used for comparing
one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways in which
the tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
Capacity
2.0Ah
2.0A
= 83.8 dB(A)
pA
= 91.8 dB(A)
wA
= 4.687 m/s
2
= 5.017 m/s
2
EN
11