Publicidad
Idiomas disponibles
Idiomas disponibles
English
• A smooth even flow of material indicates the proper
drilling rate.
• Drill straight, keeping the bit at a right angle to the
work. Do not exert side pressure on the bit when drillling
as this will cause clogging of the bit flutes and a slower
drilling speed.
• When drilling deep holes, if the hammer speed starts to
drop off, pull the bit partially out of the hole with tool still
running to help clear debris from the hole.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/installing
attachments or accessories. An accidental start‑up can
cause injury.
Your CRAFTSMAN power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk of eye
injury, always wear ANSI Z87.1 approved eye protection when
performing this procedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non‑metallic parts of the tool. These
chemicals may weaken the plastic materials used in these
parts. Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any part
of the tool into a liquid.
Accessories
WARNING: Since accessories, other than those offered
by CRAFTSMAN, have not been tested with this product, use
of such accessories with this product could be hazardous.
To reduce the risk of injury, only CRAFTSMAN recommended
accessories should be used with this product.
Recommended accessories for use with your product are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN. Call 1-888-331-4569.
VersaTrack™ (Fig. A, E)
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/installing
attachments or accessories. An accidental start‑up can
cause injury.
WARNING: To reduce the risk of serious personal
injury, do not use a damaged VersaTrack™ hang hook or
VersaTrack™ Trackwall. A damaged VersaTrack™ hang hook
or VersaTrack™ Trackwall will not support the weight of
the tool.
WARNING: To reduce the risk of serious personal injury,
ensure the screw holding the VersaTrack™ hang hook is
securely tightened.
WARNING: To reduce the risk of serious personal injury,
DO NOT suspend tool overhead or suspend objects from the
hang hook. ONLY suspend tool on the VersaTrack™ Trackwall
using the hang hook.
WARNING: The VersaTrack™ integral hang hook is not
a belt hook.
8
WARNING: Ensure that the tool weight does not exceed
the maximum rated weight of 20 lb (9 kg) for the selected
VersaTrack™ hook.
WARNING: When hanging objects on a VersaTrack™
Trackwall rail, adequately space the tools in order to not
exceed 75 lb (35 kg) per linear foot.
iMPORTAnT: When attaching the VersaTrack™ hang hook,
use only the screw that is provided. Be sure to securely tighten
the screw. VersaTrack™ accessories mount compatible tools
securely to the VersaTrack™ Trackwall system.
1. Turn the tool off, remove the battery pack
accessories.
CAUTION: Any product with exposed cutting
teeth must have them covered securely if it is to be on
the VersaTrack™ Trackwall.
2. Attach the hang hook
a. Place the VersaTrack™ hang hook onto the mounting
location
14
at the base of the tool.
b. Use a screwdriver to secure the hang hook with the
provided screw
13
. Do not use any other screw for this.
nOTE: VersaTrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN. Call 1-888-331-4569.
Belt Hook (Fig. A, F)
WARNING: To reduce the risk of serious personal
injury, ONLY use the tool's belt hook to hang the tool
from a work belt. DO NOT use the belt hook for tethering
or securing the tool to a person or object during use. DO NOT
suspend tool overhead or suspend objects from the belt hook.
WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the belt hook is secure.
iMPORTAnT: When attaching or replacing the belt hook,
use only the screw
that is provided. Be sure to securely
13
tighten the screw.
The belt hook
15
can be attached to either side of the tool
using only the screw provided, to accommodate left‑ or
right‑handed users.
1. Turn the tool off, remove the battery pack
2. Attach the belt hook
15
a. Place the belt hook onto the mounting location
the base of the tool.
b. Use a screwdriver to secure the hang hook with the
provided screw
13
. Do not use any other screw for this.
If the hook is not desired at all, it can be removed from
the tool.
1. To move belt hook
15
belt hook in place then reassemble on the opposite side.
2. Be sure to securely tighten the screw
Repairs
The charger and battery pack are not serviceable. There are
no serviceable parts inside the charger or battery pack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should be
performed by a CRAFTSMAN factory service center or a
CRAFTSMAN authorized service center. Always use identical
replacement parts.
7
and
12
on the tool.
.
7
on the tool.
, remove the screw that holds the
.
13
14
at
Publicidad
