Controlling The Led Blades (Lineo Led) With A Hand-Held Transmitter; Separate Operation Of Led Blades (Lineo Led) - Switching On, Off, Dimming - Renson ALGARVE Manual De Usuario

Controlling the led blades (Lineo LED) with a hand-held transmitter

The led blades of your terrace covering can be easily operated with a Somfy hand-held transmitter (RTS / io).
Select the channel of the led blades on the hand-held transmitter.
A. Briefly press the UP button on the Situo remote. The Lineo LED lights up to the max. intensity (100%).
B. Briefly press the DOWN button on the Situo remote. The Lineo LED turns off (0%).
C. You can increase the intensity by pressing the UP button on the Situo remote. The longer you press, the more intense the Lineo
LED lights up. With a Situo VARIATION remote, you can increase the intensity with the scroll wheel.
D. You can reduce the intensity by pressing the DOWN button on the Situo remote. The longer you press, the less intense the Lineo
LED lights up. With a Situo VARIATION remote, you can reduce the intensity with the scroll wheel.
E. You can set a certain intensity of the Lineo LED as your preference.
To do this, let the Lineo LED light up first in the desired intensity (see points C and D).
Then press (longer than 5 seconds) the MY button on the Situo remote until the Lineo LED flashes 3x to confirm that this intensity
is stored as the preset.
F. Press briefly on the MY button. The Lineo LED lights up in your preferred intensity (set at point E).
A
A
C
0,5 sec. OFF
OFF
C
B
B
0,5 sec.
0,5 sec.
ON (100%)
D
E
E
D
OFF ( 100 .... 0 %)
-
- -
E

Separate operation of led blades (Lineo LED) - switching on, off, dimming

This is possible if the installer has set this this way. After installation, each LED strip has to be set separately. Usually, each LED strip
is programmed on the same channel on the remote control, so that you can eventually control all LEDs together.
If you set each LED strip to a different channel on the remote control during programming, you can control them separately.
Note: With a Nina handheld transmitter, the LED strips are always on a separate channel.
126
A A
0,5 sec. 0,5 sec.
ON (100%)
A
0,5 sec.
ON (100%)
0,5 sec.
ON (100%)
C
ON ( 0 .... 100%)
ON ( 0 .... 100%)
ON (0 - 100%)
D D
+
+
OFF ( 100 .... 0 %)
-
C
C
OFF
OFF
D
OFF ( 100 .... 0 %)
OFF ( 100 .... 0 %)
F -
ON (0 - 100%)
> 5 sec. -
> 5 sec.
3 x
3 x
E
E
> 5 sec.
B B
0,5 sec. OFF
ON (100%)
B
B
B
0,5 sec. OFF
0,5 sec. OFF
E
+
+
OFF ( 100 .... 0 %)
- - -
ON ( 0 .... 100%)
ON ( 0 .... 100%)
+ +
E
+
F
-
0,5 sec. My position
-
0,5 sec. My position
F
F
0,5 sec.
> 5 sec.
3 x
3 x
F
C
0,5 sec. OFF
C
C
ON (0 - 100%)
E
> 5 sec.
E
+
> 5 sec.
> 5 sec.
OFF (100 - 0%)
3 x
My position
0,5 sec. My position
C
ON ( 0 .... 100%) ON ( 0 .... 100%)
+ + +
ON ( 0 .... 100%)
ON ( 0 .... 100%)
+ +
+ +
F
0,5 sec.
> 5 sec.
3 x 3 x
F
F
0,5 sec.
0,5 sec. My position
3 x
F
My pos
My po