Publicidad
- T. Mot. + Pre-Flashing : Flashes 3 seconds before
starting the motors and during motors ON.
- T. Mot. + Pre-Flashing + Automating Clos. Time :
Flashes 3 seconds before starting the motors, during
ON.e motors and during Automatic Closing Time.
PGM Auto :
(Automatic Programming of Motor Times)
The control unit allows automatic programming of engine times.
First of all, put the automation leaves in an intermediate
position, press the PGM Auto button of the SEAV "BeTech"
application via Smartphone, the control panel will automatically
open and close completely.
At the same time the Slowdown cycle is set equal to about 15%
of the complete cycle if selected.
T. MOT : (Manual programming of engine work time.)
The control unit allows manual programming of Engine Time in
every single operating phase.
Programming must be carried out when the door is closed as
follows: press the T button of the SEAV "BeTech" application
for a moment using the Smartphone, the Engine will start the
opening cycle, when the desired slow-down point is reached,
press the T. MOT key of the application, at the same time the
motor slow down to the desired position; press the T. MOT key
of the application to complete the opening cycle. Then the T.
MOT button. will start to flash quickly, now repeat the engine
time programming operation and slow down for the closing
cycle. If you do not want the control unit to slow down during
programming, at the completion of the opening and closing
cycle, press the T. MOT key of the application twice
consecutively instead of just one.
T. MOT. PED:
(Program of pedestrian work time)
The control unit allows you to manually program Pedestrian
Motor Time in each individual operating phase.
Programming must be carried out when the door is closed as
follows: press the T. MOT PED button of the SEAV "BeTech"
application for a moment using the Smartphone, the Engine will
start the opening cycle, when the desired slow-down point is
reached, press again. the T. MOT PED button of the
application, at the same time the motor decelerates to the
desired position; press the T. MOT PED button of the
application to complete the opening cycle. Then the T. MOT
button. PED will start to flash quickly, now repeat the engine
time programming operation and slow down for the closing
cycle. If you do not want the control unit to slow down during
programming, at the completion of the opening and closing
cycle, press the T. MOT PED key of the application twice
consecutively instead of just one.
slow down, during programming, upon completion of the
opening and closing cycle, press the T. MOT key of the
application twice consecutively instead of just one.
Electrical Brake :
The electronic control unit, using the dedicated SEAV "BeTech"
application via Smartphone, allows to select the Electronic
Brake function: this function reduces gate advancement due to
inertia, in correspondence with a stop or an inversion command.
Follow Me :
The electronic control unit, using the dedicated SEAV "BeTech"
application via Smartphone, allows you to select the Follow Me
function: this function can only be programmed if a Pause Time
has already been programmed, and it is planned to reduce the
pause time to 5 sec. after disengaging the photocell, ie the
window closes 5 sec. after the user has passed.
Soft Start :
The electronic control unit, using the dedicated SEAV "BeTech"
application via Smartphone, allows the Soft Start function to be
activated: this function will control the engine starting, gradually
increasing the engine 's force in the first 2 seconds of operation.
Input Configuration :
The control panel is supplied by the manufacturer with the
possibility of Activate / Deactivate the inputs of the CN2
connector or change the functionality, using the dedicated
SEAV "BeTech" application.
Reset :
The control unit allows the control panel to be reset
to the factory configuration, by using the dedicated
SEAV "BeTech" application, press RESET at the
same time the control unit will emit a confirmation
beep.
Diagnostics :
The control unit allows monitoring in Real time, using the
dedicated SEAV "BeTech" application, the status of all the
INPUTS and OUTPUTs, the number of radio controls present in
the memory and of the type and other useful information for the
installer.
8
rev. 1.0 01/06/2021
Publicidad
